Exploring the Legal Definition of Split Type Ground Station [Aeronautics and Space]

Definition & Meaning

A split type ground station is a specific configuration used in aeronautics for providing guidance to aircraft during landing. In this setup, the electronic components responsible for azimuth (horizontal direction) and elevation (vertical direction) guidance are located in separate shelters at different locations. Typically, the azimuth component is positioned at the end of the runway, while the elevation component is situated closer to the approach end of the runway. This arrangement enhances the precision of landing guidance for pilots.

Table of content

Real-world examples

Here are a couple of examples of abatement:

One example of a split type ground station is found at major international airports where precise landing guidance is critical for safety. For instance, an airport may have its azimuth guidance system installed at the end of the runway to direct aircraft during the final approach, while the elevation guidance system is positioned closer to the runway threshold to assist with vertical alignment. (Hypothetical example)

Comparison with related terms

Term Definition Key Differences
Ground Station A facility that communicates with aircraft. Does not specify the separation of components.
Microwave Landing System A type of precision approach system using microwave signals. Focuses on signal type rather than component separation.

What to do if this term applies to you

If you are involved in aviation operations or regulatory compliance and this term applies to your situation, consider reviewing relevant FAA regulations. You may also find it beneficial to explore US Legal Forms for templates that can assist with documentation related to navigational aids. If your situation is complex, consulting a legal professional is recommended.

Quick facts

Attribute Details
Typical Use Aviation landing guidance
Regulatory Body Federal Aviation Administration (FAA)
Component Locations Azimuth at stop end, elevation at approach end

Key takeaways

Frequently asked questions

It is a ground station configuration where azimuth and elevation guidance components are housed separately.